AHT Cooling Systems GmbH
EC CERTIFICATE OF CONFORMITY
Manufacturer:
Authorized person for
technical documents:
Product designation:
Type designation:
The serial number, important technical data and approval marks are indicated on the power rating
plate of each device.
The sole responsibility for the issuance of this declaration of conformity is borne by the manufacturer.
The product described above complies with the provisions of the directive:
Machinery Directive 2006/42/EC of May 17, 2006
The conformity of the above-described product, with the essential requirements of the directive is
proven by the technical documentation and the full conformity with the following standards:
Applied harmonized standards for Machinery Directive 2006/42/EC:
DIN EN 60335-1 (VDE 0700-1):2012-10; EN 60335-1:2012
DIN EN 60335-1 Ber.1 (VDE 0700-1 Ber.1):2014-04; EN 60335-1:2012/AC:2014
EN 60335-1:2012/A11:2014
DIN EN 60335-2-89 (VDE 0700-89):2010-12; EN 60335-2-89:2010
DIN EN 62233 (VDE 0700-366):2008-11; EN 62233:2008
DIN EN 62233 Ber.1 (VDE 0700-366 Ber.1):2009-04; EN 62233 Ber.1:2008
DIN EN ISO 12100:2011-03; EN ISO 12100:2010
Other standards applied in the design and construction of the products:
EN 378-1:2008+A2:2012
EN 378-2:2008+A2:2012
EN ISO 23953-1:2015
EN ISO 23953-2:2015
For R-290 devices: EN 60079-15:2010, EN 60079-0:2012
In the case of a technical change to the product described above that is not approved by us, this
declaration becomes invalid.
Signed for and on behalf of the manufacturer:
Rottenmann, 10.03.2016
AHT Cooling Systems GmbH
Werksgasse 57
A-8786 Rottenmann, Austria
Dipl.-Ing. Reinhold Resch
Werksgasse 57
A-8786 Rottenmann, Austria
Commercial refrigerator/freezer
VENTO GREEN MC, VENTO GREEN MC ROLL-IN, VENTO SV,
VENTO, VENTO ROLL-IN, VENTO PLUS
According to device models overview at the start of this operating
manual (part no. 347411).
Dipl.-Ing. Reinhold Resch
Head of Development Dept.
Authorized representative for technical documentation
_________________________________________
57