Pressure Regulation; Technical Level Programming; Maintenance; Safety Rules - Bezzera ARCADIA DE BREWING PROFILE Manual De Instrucciones

Type in the new password using letters, spaces
and/or numbers, then
vious menu without overwriting it, or vice versa
to overwrite it.
Press to return to the previous menu.
To activate/deactivate the password, touch the
part of the display showing
"ON" appears.

5.11.16 Pressure regulation

It is possible to check the inlet water pressure
by pressing the part of the display showing
; the display will show the follow-
ing screen:
Press the part of display showing
the filter-holder inserted. The display will show the
input water pressure.

5.12 Technical level programming

This part of the menu is exclusively reserved for
the installation technician. Changing even just
one set value will compromise the machine's
proper operation. To enter the technical menu
from the main screen:
when is pressed the machine turns off, but
the control unit is powered and the display will
to return to the pre-
until "OFF" or
without
BEZZERA ARCADIA BREWING PROFILE
MOD.
show the following screen:
Press to enter the technical menu where you
will be asked to enter the password.
The display shows:
After correctly entering the password, the techni-
cal menu will be shown on the display.
Warning: Do not make any changes in
the technical menu. Always refer to the
installation technician.

6 - MAINTENANCE

Follow the maintenance instructions indicated be-
low to operate the machine correctly.

6.1 Safety rules

Do not clean the machine with jets of water. Do
not immerse the machine in water when cleaning.
If the machine malfunctions, do not attempt to
repair it yourself and immediately contact techni-
cal support.
If the power cord is damaged, do not replace it
yourself. Perform the safety measures below and
contact the technical support.
Machine safety measures:
55