Steris Padlock Clip C910001 Instrucciones De Uso página 5

5. Inspect the entire Padlock Clip
Control Handle Body, and the Thumb Actuator (cracks, breaks, protruding or missing parts). If damage is evident DO NOT use
this product and contact your local Product Specialist or Customer Service Representative.
o DO NOT attempt to repair non-functional or damaged devices.
Procedural Use:
Refer to www.steris.com or
•
application and use of the Padlock Clip
Mounting the Padlock Clip
1. Hold the Padlock Clip
outside of the retroflexion curve.
Gently slide the distal end of the endoscope into the "C" shaped Endoscope Mounting Feature until it stops. See Figure 3.
2.
Caution: DO NOT push or twist the endoscope tip into the housing beyond the stop.
Check to ensure the distal tip of the endoscope, when gently inserted, reaches a stop but does not project beyond the
o
end of the device's Delivery Housing.
732380 Rev. K
defect closure system for kinks in the Linking Cable or other damage to the Delivery Housing,
®
https://www.youtube.com/watch?v=J2YQmetY6xo
® defect closure system.
® defect closure system Delivery Housing onto a flexible endoscope:
defect closure system Delivery Housing on the tip of the endoscope with the Linking Cable along the
®
for a quick reference guide or video review on
Page 5 of 116