Publicidad
Information menu. This menu contains the various information relative to boiler functioning
1° Level Button
2° Level
P11
P12
P13
P14
(with optional
external probe
present)
D
NO S. EXT
(without
C
Optional external
probe)
P15
P17
P19
Customisation menu. This menu contains all of the functioning options that can be customised. (The first item of the various options that appears inside the
parameter is that selected by default).
Important:if the international language is to be restored (A1), proceed as follows:
-
press button "D" to enter the configuration menu.
-
turn selector switch "3" to PERSONAL.
-
press button "D" to confirm.
-
turn selector switch "3" to "DATI".
-
press button "D" to confirm.
-
turn selector switch "3" to "LI NGUA".
-
press button "D" to confirm.
-
turn selector switch "3" to "A1".
-
press button "D" to confirm.
At this point the international items indicated inthe menu tables appear on the display.
1° Level Button
2° Level
P31
P32
D
C
P33
RESET
Button
3° Level
Button
D
C
P14/A
P14/B
D
P14/C
C
RESET
selection
C
D
C
Button
3° Level
Button
AUTO
(Default)
D
D
x
ON
to select
C
C
OFF
D
P32/A
C
D
C
D
P32/B
C
D
OFF
x
D
to select
C
ON
C
D
x
to select
C
PL
IE
Displays the version of management software of the circuit board installed in
the boiler
Displays the total functioning hours of the boiler
Displays the number of burner ignitions
Displays the current external temperature (if optional external probe present)
Displays the recorded external minimum temperature (if optional external
probe present)
Displays the recorded external maximum temperature (if optional external
probe presentl)
D
x
By pressing button "D" the MIN and MAX temperatures measured are zeroed
No display on this boiler model
Displays the percentage speed of instantaneous rotation of the fan (from 0 to
100%)
Displays the last 5 events that have caused boiler shutdown.
Indicator (6) shows the sequential number from 1 to 5 and the relative error
code on the indicator (7).
By pressing button "D" repeatedly it is possible to visualise the time of functio-
ning and the number of ignitions at which the anomaly occurred
4° Level
Button
The display lights up when the burner is on
and when the commands are accessed, it remains on
for 5 seconds after the last operation performed
The display is always lit
The display lights up only when the commando are
accessed and remains on for 5 seconds after the last
operation performed
The indicator (7) displays the output temperature
P32/A.1
from the primary heat exchanger
D
The indicator (7) displays the current external tem-
P31/A.2
x
perature (with optional external probe)
to select
ITALIAN
All descriptions are given in Italian
(Default)
C
A1
All of the descriptions are stated in English
By activating this function in winter mode it is pos-
sible to activate the environmental heating function
even if the Remote Control or TA are out of order
By pressing button "D" the customisations made are
zeroed, restoring the values set in the factory
161
Description
Description
Publicidad
