To regulate prime air of oven burner: place the regulation ear-ring air to the measures
•
illustrated on following drawing and consulting table 9.
Tab. 9
Methane
Burner
G20
Oven B =
13mm
After the necessary transformation and substitution, reassemble precisely every removed
•
parts for testing to come back to original situation.
To apply on the technical plate, in the appropriate space, the complementary little plate
•
with the characteristics of new gas type installed.
Σ
2 USING - RESERVED TO USER
2.1 Important warnings
To read carefully this section's instruction which are very important for use, maintenance
•
and appliance safety. This handbook must be ridden and study in all parts, otherwise it
will be consider as " Improper Use " and a not correct employ of the Lincar equipment.
Attention ! The warranty is out of validity if the ordinary or extraordinary maintenance
•
operations are not executed or it are executed partially.
To take care of this handbook to use it every time it's necessary.
•
The appliance illustrated in this handbook must be employed only from qualify staff.
•
The appliance must be employed only for a professional cooking: other use would be
•
improper therefore dangerous.
The appliance functioning, create high temperature on some internal and external
•
surfaces, with which user could get in touch so it's necessary the highest attention!
To use large pots that overcomes from the perimeter of the machine, it can be dangerous
•
for the user.
The operation of the machine must always happen under surveillance.
•
Don't wash the appliance with direct or high pressure water jets.
•
To disconnect the appliance in case of breakdown or bad functioning, closing the general
•
gas cock and disconnect it from electrical system.
Butane/Propane
G30/G31
13mm
24/72
B
Complementary little plate
mod. G02