Specifications - Subdrive15/Subdrive20 - Franklin Electric MonoDrive Connect N3R Manual Del Propietário

SubDrive/MonoDrive Connect
Specifications – SubDrive15/SubDrive20
NEMA 3R
Model No.
(indoor/outdoor)
Voltage
Phase In
Frequency
Current (max)
Input from
Power Factor
Power Source
Power (idle)*
Power (max)
Wire Gauge Size(s)
Voltage
Phase Out
Output to Motor
Frequency Range
Current (max)
Wire Gauge Size(s)
Factory Preset
Pressure Setting
Adjustment Range
Temperature
Operating
(at 230 VAC input)
Conditions
(A)
Relative Humidity
Controller Size
(B)
NEMA 3R
(approximate)
Pump (60 Hz)
For Use With
FE Motor
Notes:
(A) Operating temperature is specified at full output power when installed as described in Location of Drive on pg. 10-14.
(B) Refer to pg. 23-26 for detailed Drive Mounting.
(C) When a SubDrive15/SubDrive20 is used with a single-phase 3-wire motor (see Motor Type on pg. 28),
the MonoDrive pump and motor specifications on page 37 apply.
* Idle power is defined as input power used by the drive when the drive is not running the motor, the drive fan is off,
and no communication is active. Idle power is increased by 1 W if Wi-Fi is on.
38
All manuals and user guides at all-guides.com
SubDrive15
5870205103C
208/230 +/- 10% VAC
Single-Phase
60/50 Hz
12 A
~ 0.95
4 W
2.5 kW
See Table 1, pg. 18. Consult Federal, State, and
Local codes for branch circuit installations
Variable based on frequency
Single-Phase (3-Wire) OR Three-Phase
30-77 Hz (3/4 hp, 0.55 kW) pump
30-72 Hz (1 hp, 0.75 kW) pump
30-60 Hz (1.5 hp, 1.1 kW) pump
30-63 Hz (Single-Phase Motors)
5.9 A (three-phase), 10.4 A (single-phase)
See Table 2, pg. 19 for wire sizing
50 psi (3.4 bar)
Analog Transducer: 5-95 PSI (0.3 - 6.6 bar)
Pressure Sensor: 25-80 psi (1.7 - 5.5 bar)
-13 °F to 122 °F (-25 °C to 50 °C)
20-95%, non-condensing
9-3/4" x 16-3/4" x 5-1/4" : 20 lbs
(25 x 50 x 13 cm) : (11.8 kg)
0.5 hp (0.37 kW) pump with 214505-series motor
0.75 hp (0.55 kW) pump with 214507-series motor
1.0 hp (0.75 kW) pump with 214508-series motor
0.5 hp (0.37 kW), 0.75 hp (0.55 kW), or 1.0 hp (0.75 kW)
pump with 234513-series motor
0.75 hp (0.55 kW), 1.0 hp (0.75 kW), or 1.5 hp (1.1 kW)
pump with 234514-series motor
214505-series (0.5 hp, 0.37 kW) single-phase, 3-wire
214507-series (0.75 hp, 0.55 kW) single-phase, 3-wire
214508-series (1.0 hp, 0.75 kW) single-phase, 3-wire
234513-series (1.0 hp, 0.75 kW) three-phase
234514-series (1.5 hp, 1.1 kW) three-phase
SubDrive20
5870205303C
208/230 +/- 10% VAC
Single-Phase
60/50 Hz
19 A
~ 0.95
5 W
4.2 kW
See Table 1, pg. 18. Consult Federal, State, and
Local codes for branch circuit installations
Variable based on frequency
Single-Phase (3-Wire) OR Three-Phase
30-78 Hz (1 hp, 0.75 kW) pump
30-72 Hz (1.5 hp, 1.1 kW) pump
30-60 Hz (2 hp, 1.5 kW) pump
30-63 Hz (Single-Phase Motors)
8.1 A (three-phase), 13.2 A (single-phase)
See Table 2, pg. 19 for wire sizing
50 psi (3.4 bar)
Analog Transducer: 5-95 PSI (0.3 - 6.6 bar)
Pressure Sensor: 25-80 psi (1.7 - 5.5 bar)
-13 °F to 122 °F (-25 °C to 50 °C)
20-95%, non-condensing
9-3/4" x 19-3/4" x 5-1/4" : 26 lbs
(25 x 50 x 13 cm) : (11.8 kg)
0.5 hp (0.37 kW) pump with 214505-series motor
0.75 hp (0.55 kW) pump with 214507-series motor
1.0 hp (0.75 kW) pump with 214508-series motor
1.5 hp (1.1 kW) pump with 224300-series motor
2.0 hp (1.5 kW) pump with 224301-series motor
0.5 hp (0.37 kW), 0.75 hp (0.55 kW), or 1.0 hp (0.75 kW)
pump with 234513- series motor
0.75 hp (0.55 kW), 1.0 hp (0.75 kW), or 1.5 hp (1.1 kW)
pump with 234514-series motor
1.0 hp (0.75 kW), 1.5 hp (1.1 kW), or 2.0 hp (1.5 kW)
pump with 234315-series motor
234513-series (1.0 hp, 0.75 kW) three-phase
214508-series (1.0 hp, 0.75 kW) single-phase, 3-wire
224300-series (1.5 hp, 1.1 kW) single-phase, 3-wire
224301-series (2.0 hp, 1.5 kW) single-phase, 3-wire
214505-series (0.5 hp, 0.37 kW) single-phase, 3-wire
214507-series (0.75 hp, 0.55 kW) single-phase, 3-wire
234514-series (1.5 hp, 1.1 kW) three-phase
234315-series (2.0 hp, 1.5 kW) three-phase