Dartboard Functions - BULL'S X-Dartor Manual De Instrucciones

18/106
2. Mounting with either batteries or adapter
Choose a location to hang the dartboard
where is about 10 feet (3.048 m) of open
space in front of the board. The "toe-
line" should be 7'9 1/4" (2.37 M) from
the face of the dartboard. Since this
dartboard is powered with either an AC
adapter or batteries, you could mount it
anywhere or close to an electronic outlet
for convenience.
Locate a wall stud and place a mark
77.5"" from the floor.
Screw the mounting screw in the center
of the stud using the mark you made as
a guide. If not mounting into studs, be
sure to use drywall or other securing
hardware appropriate to the wall you are
using.
Mount the dartboard on the wall by
lining up the hang hole on the back of
the dartboard with the screw. If you
want to mount the dartboard even more
securely to the wall, you can fasten four
screws through the holes located in the catch ring area (the area outside the scoring segments)

3. Dartboard Functions

POWER – switch/button - Located on the lower right corner on the side of the dartboard. Be sure the AC
Adapter is plugged into the jack on the right side of the dartboard or batteries are installed. Press the POWER
switch to turn game on or off.
START/HOLD button - This multi-function button is used to:
 START the game when all options have been selected.
 Put dartboard in HOLD status between rounds to allow player to remove darts from the target area.
GAME GUARD button –After the START button has been pressed and play has begun, the GAME GUARD
feature can be activated. When the button is pressed, all of the keys will 'lock'. When GAME GUARD is active,
a misguided dart hitting a button will not affecting your game. To deactivate the GAME GUARD, simply press
the button again and the keys will unlock.
BOUNCE OUT button - Decide before play if you want to count darts that do not remain in board ("bounce-
outs") or not. If not, simply press the BOUNCE OUT button immediately after a bounce out occurs to deduct the
score that registers
DART-OUT/SCORE button - The DART-OUT feature is active only during the "01" games (301, 401, etc.).
When a player's score falls below 160, he/she can press the DART OUT button to get a suggestion from the
dartboard as to the 3 darts needed to finish the game. Note: doubles and triples are indicated with 2 and 3 dashes
to the left of the number respectively. The SCORE feature allows player to access score not current on display.