INSTRUCTIONS FOR USE
Product Specifications:
Mechanical Specifications
Product Dimensions
Material
Safe Working Load on the Device
Overall Weight of Device
Storage Specifications
Storage Temperature
Storage Relative Humidity Range
Operating Temperature
Operating Relative Humidity Range
Compatibility Specifications
Compatible with:
Operating Room Table Compatibility
System Setup and Use:
1. Prior to placing the Stirrups on the table, the patient should be examined and assessed for any
pre-existing conditions that might prohibit the safe use of lithotomy positioning equipment.
2. Stirrups can be mounted to the table using the Secure-Lok
Simple blade clamp or a standard surgical table blade rail clamp.
Description
40" x 11" x 16" (L x W x H) approx.
101.6 cm x 28 cm x 40.6 cm
Stainless Steel, Aluminum, and Low temperature
Polymers.
• ComfortFin 350 Do not exceed 350 lbs. (159 kg)
patient weight.
• ComfortFin 500 Do not exceed 500 lbs. (227 kg)
patient weight.
• ComfortFin 800 Do not exceed 800 lbs. (363 kg)
patient weight.
• ComfortFin 250 Do not exceed 250 lbs. (113 kg)
patient weight.
• ComfortFin 400 Do not exceed 400 lbs. (181 kg)
patient weight.
• ComfortFin 350 13.2 lbs. (5.9 kg)
• ComfortFin 500 & 800 14.6 lbs. (6.6 kg)
• ComfortFin 250 10.2 lbs. (4.6 kg)
• ComfortFin 400 12.2 lbs. (5.5 kg)
Description
-20ᵒ F to 140ᵒ F (-29ᵒ C to +60ᵒ C)
15% to 85%
This device is intended to be used in a controlled
Operating Room environment.
Description
Clamps:
• Secure-Release
®
Blade Clamp
• Select Blade Clamp
• Simple Blade Clamp
• or equivalent clamps in correct rail size.
Pads:
• ComfortFin Stirrup Replacement Pads
The ComfortFin stirrups are compatible with the following
surgical table rail styles: US, UK, EU, DEN, JP, based
on clamp selection.
™
clamps, the Select blade clamps,
Page 5
IFU Document Number: 03-0123-REV-E