Assembling The Hygienikit Milk Collection System - Ameda Pearl Instrucciones De Uso

!
IMPORTANT: The flanges and milk storage containers can also be washed on upper rack of a standard,
household dishwasher. DO NOT use solvents or abrasives. Allow to air dry on a clean surface.
TUBING:
It is necessary to wash the tubing only if condensation is present. If condensation is present in the tube, wash
and dry it immediately or replace the tubing. If milk is present in the tubing, do not attempt to wash or clean the
tubing. Instead contact Ameda Customer Service at 1.866.992.6332.
HOW TO WASH TUBING:
1. Rinse the tubing by pouring cool water and make sure the water flows through the entire tubing from one
end to the other end.
2. Wash the tubing in warm, soapy water and rinse thoroughly.
HOW TO DRY TUBING: Hang the tubing to air dry and make sure that the tubing is completely dry before using.
5.2 Assembling the HygieniKit™ Milk Collection System
Once your pump parts are dry, wash your hands and assemble the HygieniKit Milk Collection System (Pump Kit).
1
Tubing
Tubing Adapter
2
HOLD by the rim or thicker
sides of the valve.
12 | ENGLISH
Adapter Cap
Diaphragm
Breast
Flange
Valve
Bottle
3
PUSH the valve onto the
bottom of the flange.