Ameda Pearl Electric Breast Pump Trolley - Ameda Pearl Instrucciones De Uso

8. AMEDA PEARL ELECTRIC BREAST PUMP TROLLEY

The Ameda Pearl Breast Pump Trolley is not included with the Ameda Pearl Electric Breast Pump and is sold
separately.
Attaching the Ameda Pearl Electric Breast Pump to Trolley (Trolley is an optional accessory)
NOTE: Attach pump to trolley prior to plugging cord into wall outlet.
1: When assembling Trolley, ensure not to place the basket any higher than 19 inches from the floor (height to
bottom of basket).
2: Place the three rubber washers on the trolley mounting plate to align over the three holes (C).
3: Place the Ameda Pearl Breast Pump on the trolley mounting plate so that the basket lies underneath the control
panel. Ensure the rubber feet (A) are on the mounting plate and the three holes (B) in the bottom of the pump
are aligned with the three washers and holes (C) in the mounting plate.
4: Use three mounting screws supplied with the trolley to secure the pump to the trolley mounting plate.
A. Rubber Feet (4)
B. Pump Mounting Holes (3)
Pump Bottom View:
Trolley Operating Instructions
1: Once pump is attached to trolley, ensure all locking wheels are unlocked to move the trolley-pump assembly.
Wheels are unlocked by lifting the locking tab on each locking wheel.
2: Move the trolley-pump assembly by gently pushing.
3: When trolley-pump assembly is in the desired position, lock all locking wheels by pushing down on the
locking tab on each locking wheel.
20 | ENGLISH
Breast Pump
Bottom Front
C. Trolley Plate Mounting Holes (3)
D. Trolley Basket (1)
A
B
Trolley Top View:
Trolley Mounting Plate Front
C
D