MAAX Grondfress 21039 Manual De Usuario página 53

In time due to abrasion , etc. It is your
responsibility to replace the decals when they
become hard to read. . The location of these
SAFETY DECAL INFORMATION
decals and their part numbers for ordering are
An important part of the safety system incorporated in this trimmer are the warning and
information decals found on various parts of the trimmer. These decals must be replaced in time
shown below.
due to abrasion, etc. It is your responsibility to replace the decals when they become hard to read.
The location of these decals and their part numbers for ordering are shown below.
WARNINGS
Warnings-Do's
▲ WARNING ▲ DANGER ▲
IF THE TILLER/CULTIVATOR PRECAUTIONS ARE NOT FOLLOWED,
THE USER RISKS SERIOS INJURY TO THEMSELVES AND OTHERS.
WARNING ▲DANGER ▲
▲
READ AND UNDERSTAND THIS MANUAL BEFORE ATTEMPTING
IF THE TILLER/CULTIVATOR PRECAUTI-
TO OPERATE THIS TILLER / CULTIVATOR.
ARE NOT FOLLOWED , THE USER RISKS SERIOS
INJURY TO THEMSELVES AND OTHERS.
1. Always hold both handles firmly while the tines are in motion and/or the engine is running.
ATTENTION! The blades can run out after releasing the throttle. Make sure that the blades have
READ AND UNDERSTAND THIS MANUAL BEFORE
come to a complete stop and that the engine is switched off before releasing the rotary tiller.
2. Always ensure that the ground is solid and that you have good balance. Do not overreach
ATTEMPTING TO OPERATE THIS
when operating the rotary tiller. Before operating the rotary tiller, check the work area for
obstructions that could cause you to lose your balance or control the machine.
TILLER / CULTIVATOR.
3. Thoroughly inspect the area where the equipment is to be used and remove all objects that
could be thrown by the machine.
4. Always keep the area free from children, pets and bystanders.
1. Always keep a firm grip on both handles
5. Always stay alert. Watch what you are doing and use common sense. Do not operate the unit
while the tines are moving and / or the
if you are tired.
6. Always dress appropriately. Do not wear loose clothing or jewellery, these can get caught in
engine is running . BE AWARE! The tines
moving parts. Use sturdy gloves. Gloves reduce the transmission of vibrations to your hands.
Prolonged exposure to vibration can cause numbness and other ailments.
may coast
7. Always wear sturdy footwear and long trousers when working. Do not operate the unit in bare
feet or with open sandals on.
released . Make sure tines have come to a
8. Always wear ear and eye protection. Eye protection must comply with ANSI Z 87.1. To prevent
hearing damage, we recommend wearing hearing protection when operating the
complete stop and engine is off before
equipment.
letting go of the Tiller / Cultivator.
2. Always maintain a firm footing and good
balance. Do not overreach while operating
after throttle trigger
3. Thoroughly inspect the area where
equipment is to be used and remov
objects , that can be thrown by the
machine.
Warning- Do's cont
1. Always keep area clear of children
and bystanders.
2. Always stay alert. Watch what you
doing and use common sense. Do
operate unit when fatigued.
3. Always dress properly. Do not wea
clothing or jewelry, they might get
in moving parts. Use sturdy gloves
Gloves reduce the transmission of
vibration to your hands. Prolonged
exposure to vibration can cause nu
and other ailments.
4. While working, always wear subst
footwear and long trousers. Do no
operate the equipment when barefo
wearing open sandals.
5. Always wear ear and eye protectio
Eye protection must meet ANST Z
ONS
To avoid hearing damage , we
recommend hearing protecting be
whenever using the equipment.
6. To reduce fire hazard, keep the eng
and petrol / gas storage area free o
vegetative material and excessive
7. Start the engine carefully , accordi
the manufacturer's instructions an
feet well away from tool(s).
is 8. Keep all nuts, bolts and screws tig
sure the equipment is in safe work
condition .
9. Use extreme caution when reversin
pulling the machine towards you..
10. Work only in day light or good art
53