Publicidad
This installation manual has been published in order to facilitate the installation of Thermo King vehicle-driven refrigeration units in trucks and vans. This manual
is comprised of several sections covering the installation of condensers and evaporators into the truck or van body. It also covers the components and wiring that
should be connected to the vehicle's engine that supplies electrical power to the unit. Due to its complexity, you should not attempt this installation unless you:
•
are an experienced mechanic.
•
can safely lift 34 kilos (75 lb).
•
are certified and authorised to repair and maintain transport refrigeration systems.
•
have a basic understanding of electricity and electrical wiring.
•
have the necessary tools and equipment to complete the installation.
•
are dealing with a truck or van body that meets the installation requirements in its design and manufacture.
This manual is published for informational purposes only. Thermo King makes no representations or warranties, express or implied, with respect to the information,
recommendations and descriptions contained herein. Information provided should not be regarded as all-inclusive or covering all contingencies. If further
information is required, Thermo King Corporation Service Department should be contacted.
Thermo King's warranty shall not apply to any equipment which has been "so installed, maintained, repaired or altered as, in the manufacturer's judgment, to affect
its integrity".
Manufacturer shall have no liability to any person or entity for any personal injury, property damage or any other direct, indirect, special, or consequential
damages whatsoever, arising out of the use of this manual or any information, recommendations or descriptions contained herein.
Introduction
Eng
i
Publicidad
