Publicidad
Idiomas disponibles
Idiomas disponibles
Quick Start Guide
IT IS STRONGLY RECOMMENDED THAT THE ENTIRE MANUAL IS READ AND UNDERSTOOD BEFORE
OPERATING YOUR MOVER, THIS ENSURES PROPER SETUP AND SAFE USE. THIS QUICK START GUIDE PAGE
ACTS AS A QUICK POINT OF REFERENCE FOR THE REGULARLY USED FUNCTIONS OF THE HANDSET.
Power On
1. Turn caravan isolation key to the on position.
2. Press handset button Fig.1.C twice quickly.
3. When all icons are solid on the home screen, the mover is ready to operate.
Power Off
1. Press handset button Fig.1.C twice quickly
2. Turn caravan isolation key to the off position.
Engage Mover (Auto Mover Only)
1. Press and hold handset button Fig.1.C for three seconds to begin engaging,
once completed the handset will return to the home screen automatically.
Disengage Mover (Auto Mover Only)
1. Press and hold handset button Fig.1.C for three seconds to begin disengaging,
once completed the handset will return to the home screen automatically.
Manoeuvring
1. Move thumb stick Fig.1.B progressively in the direction of travel.
2. Press thumb stick Fig.1.C once to flip direction of travel if required.
Basic Troubleshooting - See page 12 for more info
Handset not powering on (no information on display).
Replace handset batteries. Failing this, contact manufacturer.
Magnifying glass icon showing in bottom left corner of screen.
This indicates that the handset is searching for the control box and has not yet connected. Ensure the isolation key
is switched on and the control box within the caravan is receiving power (LED lights on). If the handset does not pair
within 10 seconds (Icon should change to smiling face), press thumb-stick button Fig.1.B two times to enter pairing
mode and hold within 10cm of the box.
No LED lights showing on control unit within caravan.
This indicates a power issue. Ensure that the isolation key has been turned to the "on" position and that the battery is
fully charged and functioning properly. Failing this, please contact manufacturer.
The handset pairing process has been followed and both the handset and control box are paired (home screen
icons are now solid) but the system will still not operate.
Check the handset screen or control box within the caravan for an indication of the error code using page 13 in this
manual as a guide.
The caravan will move for a short distance but then stops.
Check the handset screen or control box within the caravan for an indication of the error using page 13 in this manual
as a guide. If the mover system moves for a short distance this is usually a power related issue (battery). Ensure that
the battery is fully charged and is working properly.
Fig.1
B
D
EN 04
Package Contents (Fig.A)
REF
QTY
1
1
2
1
A
3
2
4
1
C
Fig.A
1
DESCRIPTION
Electronic Control Unit
Remote Control Handset
AA 1.5V Battery (not illustrated)
Link Cable (not illustrated)
EN 05
2
Publicidad
