Publicidad
Idiomas disponibles
Idiomas disponibles
•
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
•
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
•
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
•
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
•
Keep first aid equipment and fire extinguisher close
at hand.
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with defective safety devices.
•
Do not remove or do modifications to safety devices.
•
Do a check of the safety devices regularly. If
the safety devices are defective, speak to your
Husqvarna service agent.
To do a check of the power switch
•
Disconnect the battery charge cable.
•
Set the power switch to the "1" position. Make sure
that the display comes on.
•
Set the power switch to the "0" position. Make sure
that the product stops immediately and that the
display goes off.
To do a check of the operation conditions
Do a check of the operation conditions daily.
1. Make sure that you cannot start drive mode when
the cutting deck is in the mow position.
2. Make sure that you cannot start drive mode when
you push the pedals.
3. Make sure that you cannot start drive mode when
you are lifted from the seat.
4. Make sure that you cannot start drive mode when
the charger is connected to the product.
5. Make sure that you cannot start drive mode when
the electric parking brake system is disengaged.
1949 - 003 - 28.03.2023
Read the warning
6. Make sure that the product stops when the cutting
deck motors are engaged and you lift from the seat.
To do a check of the forward pedal and rearward pedal
1. Start the product and set drive mode to on.
2. Make sure that the forward pedal and rearward
pedal are not blocked and can be operated freely.
3. Push the forward pedal carefully to move forward.
4. Release the forward pedal to brake. Make sure
that the brake engages when the forward pedal is
released.
Note:
The product has an automatic brake that
engages when you release the pedals. For more
brake power when you decrease the speed, push
the other pedal.
5. Do the same procedure for the rearward pedal.
6. Make sure that the product does not move when the
forward and rearward pedals are not engaged.
Parking brake
WARNING:
not work, the product can start to move
and cause injury or damage. Make sure that
the parking brake is regularly examined and
adjusted.
To do a check of the parking brake on page
Refer to
23 .
Warning indicator on the display
CAUTION:
the display comes on, stop the product and
Display - Troubleshooting on page
refer to
29 .
Protective covers
Missing or damaged protective covers increase the
risk of injury on moving parts and hot surfaces. Do
a check of the protective covers before you operate
the product. Make sure that the protective covers are
If the parking brake does
If the warning indicator on
11
Publicidad
