Husqvarna R 200iX Manual De Usuario página 15

a) Total power on time in drive mode.
b) Total traction time.
c) Total cut time or use of other front accessory.
d) Number of installed batteries.
Note:
A second battery can be installed in
the product. Speak to your Husqvarna dealer for
installation.
WARNING:
Do not try to install or repair the
batteries. Only let an approved servicing
dealer do installations and repairs.
To set the time on the display
1. Push the jog wheel to see the display menu.
2. Select the settings menu.
1949 - 003 - 28.03.2023
Risk of electrical shock.
3. Select the clock symbol.
4. Turn and push the jog wheel to set the hours,
minutes and time format (24h / 12h).
To set the sound to on or off
Note:
When the sound is set to off, you do not hear
the notification sounds for warnings, errors or start.
1. Push the jog wheel to see the display menu.
2. Select the settings menu.
3. Select the loudspeaker symbol.
4. Push the jog wheel to set the sound to on or off.
To read error messages
Note:
An error message is a combination of symbols.
Error messages on the display on page 30 .
Refer to
1. Push the jog wheel to see the display menu.
2. Select the warnings symbol on the display menu.
Note:
The error menu shows a maximum of 3
error messages. If there are more than 3 error
messages, the error menu shows the first 3 error
messages.
Note:
When an error is gone from the system, its
error message is not saved in the error menu.
3. Refer to Error messages on the display on page 30
for information and instructions.
15