Publicidad
Idiomas disponibles
Idiomas disponibles
Tire pressure
The correct tire pressure is 60 kPa (0.6 bar / 8.5 PSI) on
all 4 tires.
To put the cutting deck in servicing
position
To remove and attach the cutting
1. Do step 1–7 in
deck on page 12 .
2. Lift the cutting deck to vertical position until a
click sound is heard. The cutting deck is locked
automatically in the vertical position.
To put the cutting deck in mow position
1. Hold the front edge of the cutting deck with your left
hand.
2. Loosen the lock with your right hand.
24
3. Fold down the cutting deck and push it in until it
stops.
4. Connect the cable to the cutting deck.
5. Lift the cutting height stay from the stay holder and
put it in the hole.
6. Attach the front cover.
7. Move the cutting height lever from the servicing
position to one of the positions with a number.
To examine and adjust the ground
pressure from the cutting deck
A correct ground pressure makes sure that the cutting
deck moves along the surface but does not press too
hard against it.
1. Make sure that the air pressure in the tires is 60 kPa
(0.6 bar / 9.0 PSI).
2. Park the product on a level surface.
3. Lower the cutting deck to mow position.
1949 - 003 - 28.03.2023
Publicidad
