Publicidad
Idiomas disponibles
Idiomas disponibles
1. Turn the knob counterclockwise to loosen.
2. Adjust the height of the steering wheel.
3. Turn the knob clockwise to tighten.
CAUTION:
of the knob points up.
To lift and lower the cutting deck
•
To lift the cutting deck to transport position, pull the
lift lever rearward. If the drive mode is on, the blades
stop to rotate automatically.
•
To lower the cutting deck to mow position, push
the lock button and move the lift lever forward. If
the drive mode is on, the blades start to rotate
automatically.
18
Make sure that the long end
Parking brake
The parking brake is electric. The parking brake is
automatically applied when the product is stationary and
released when you push the pedals. A parking brake
symbol shows on the display when the parking brake is
applied.
To move the product manually
WARNING:
product, make sure that the electric parking
brake system is engaged.
CAUTION:
longer than necessary or at a speed higher
than 6 km/h.
To move the product with the motor off, the electric
parking brake system must be disengaged. The lever for
the electric parking brake system is behind the left rear
wheel.
•
Release the lock to the electric parking brake system
(A) and move the lever (B) to the left position to
disengage the electric parking brake system.
Before you operate the
Do not push the product
A
B
1949 - 003 - 28.03.2023
Publicidad
