Publicidad
Idiomas disponibles
Idiomas disponibles
Display
To use the display menu
1. Push the jog wheel (A) to see the display menu.
B
A
2. Turn the jog wheel (A) to scroll through the available
menus.
3. Push the jog wheel (A) to select a menu.
4. Push the button (B) to go back and to close the
display menu.
Note:
Most menus are only available from idle
mode or when the product is stationary. Refer to
Display modes on page 5 . The menu automatically
closes when you push the start button or the pedals.
Accessory speed
The accessory menu is only available when your
product has an accessory with adjustable speed. Refer
to the operator's manual for the accessory. For more
information about available accessories for the product,
speak to your Husqvarna dealer.
To set the light menu to ON
Note:
Light is an optional accessory. For more
information about available accessories for the product,
speak to your Husqvarna dealer.
Note:
Before you can operate and adjust the light, the
light menu must be set to ON.
1. Push the jog wheel to see the display menu.
2. Select the settings menu.
14
3. Scroll to the light menu.
4. Push the jog wheel to set the light menu to ON.
Note:
The light menu is set to ON the next time you
start the product.
To adjust the lights
Note:
The light menu must be set to ON after lights
To set the light menu to ON on
are installed. Refer to
page 14 .
1. Push the jog wheel to see the display menu.
2. Scroll to the lights off symbol.
3. Push the jog wheel to set the work lights to ON.
4. Push the jog wheel to set the work lights and
headlights to ON.
To read system information
1. Push the jog wheel to see the display menu.
2. Select the information symbol.
3. Turn the jog wheel to scroll between these system
information views:
1949 - 003 - 28.03.2023
Publicidad
