Varex Imaging XRpad2 HWC-M Digital X-ray Manual De Usuario página 16

XRpad2 HWC-M Detectors User Manual
If a Problem Occurs
WARNING
WARNING
Maintenance and Inspection
WARNING
WARNING
If any abnormal condition, such as smoke, fumes, or strange sounds,
is evident, turn OFF the X-ray detector, turn OFF and unplug the
power supply from the AC outlet, and immediately ask your
establishment's safety representative to contact your dealer,
distributor, or device manufacturer.
Further use under abnormal conditions may result in severe personal
injury, death, or substantial product damage.
When liquid has been spilled into or on any part of the X-ray detector
or power supply (if applicable), or when the X-ray detector, its
component, or accessory is dropped, unplug the power supply from
the AC outlet, and immediately ask your establishment's safety
representative to contact your dealer, distributor, or device
manufacturer.
Further use under abnormal conditions may result in severe personal
injury, death, or substantial product damage.
Turn OFF the power of the X-ray detector when the inspections
indicated in this manual are going to be performed. Ignoring this
warning may result in electric shock, which may result in severe
personal injury, death, or substantial product damage.
When the X-ray detector system is going to be cleaned, turn OFF the
X-ray detector and:
• Remove the battery pack.
• If the X-ray detector is connected to a power supply, turn OFF the
power switch and/or unplug the power supply cable from the AC
outlet. If the X-ray detector is battery powered, remove the battery.
• Never use thinner, benzine, acetone, or other flammable cleaning
agents. Ignoring this warning may result in explosion, fire, or
electric shock, which may result in severe personal injury, death, or
substantial product damage.
www.vareximaging.com
For Your Safety
13