Varex Imaging XRpad2 HWC-M Digital X-ray Manual De Usuario página 54

XRpad2 HWC-M Detectors User Manual
Table 12 Overview of the XRpad Interface and Power Unit (Continued)
6 Trigger In Signal from Hand Switch (Prep/Expose)
7 Trigger In/Out I/F
8 XRpad Interface and Power I/O
9 TRIG IN Signal
10 TRIG OUT Signal
11 LAN Port to Imaging Workstation
12 USB Connector
13 Remote Detector Power
14 Functional Ground Connector
15 Potential Equalization Connector
16
Power AC connector (
17
AC Input LED (Green) (
18
AC Power Switch
Table 13 includes the specification for the XRpad Interface and Power Unit.
Table 13 Specification of the XRpad Interface and Power Unit
Electrical Specification
AC Input Voltage [16]
AC Frequency [16]
DC Output [8]
Trigger In Signal from Hand Switch [6]
Trigger Out Signal to Generator [5]
Trigger In Signal [7, 9]
Trigger Out Signal [7, 10]
DC Output 5PF [7]
Protection Class I:
Mechanical Specification
Size
Temperature Ranges
Operating
)
)
100 V - 240 V
50 Hz/60 Hz
13.5 V/5 A, 15 V/1 A
(voltage level is dependent of load)
5 V - 24 V/10 mA (SELV)
Same level as Trigger In Signal
5 V (SELV)
5 V
5 V/40 mA
260 mm (L) × 205 mm (W) × 50 mm (H)
10°C to 35°C
www.vareximaging.com
XRpad Interface and Power Unit
51