Selco RC10 Instrucciones De Uso página 23

6.0 SELECTING THE WELDING PROCESS
Press the F1 function key repeatedly to activate the welding pro-
cess required.
Main MMA welding menu
Main TIG DC welding menu
Main MIG welding menu
To select the item required inside the menu displayed, press the
T6 keys to move the selection bar and press the ENTER key. The
selection you have made can be cancelled by pressing the ESC
key, to return to the previous menu. Note that sometimes the
number of items in one menu is greater than can be actually di-
splayed.
7.0 MODIFYING THE PARAMETERS
Press the DATA CHANGE key. The selection will appear supe-
rimposed on the first parameter displayed. Move the bar over
the parameter that you wish to change, by using the T6 keys.
Press the ENTER key and enter the new parameter by the T5
keyboard. Press the ENTER key again to make the modification
effective.
In the MMA and TIG process, the welding current can also be
modified, at any moment, by using the T7 keys. In the same way,
in MIG, the wire speed, thickness, welding current and voltage
can be modified via keys T7 and T6 respectively.
For a more rapid selection, the parameter to be modified can be
chosen by pressing the corresponding number in the left-hand
column.
8.0 DISPLAYING THE READINGS
If the display is in data display mode and the MEAS key is pres-
sed, the welding voltage and current readings will appear at the
bottom of the screen. By pressing any key, you can quit the page
of readings and return to the display of the parameters set.
By pressing the MEAS key, after having displayed the welding
current and voltage readings, the display shows the following
pages.
23