dormakaba LA GARD 700 Serie Guia Del Usuario página 13

2.3 Getting Started
This section outlines typical use of a System with a single or multi-lock/single or multi-user setup with
references to various sections found through this document.
Follow these steps to get started implementing a System:
1. Identifying System Requirements
a. Identify Required System Components – Review
installation procedures regarding each component of a System. For single lock Systems, the use
of a Multiplexer is not required.
b. Identify Required System Functions – Review
how each user is authorized to use the system.
c. Identify Required User Types and Privileges – Read
"User Privileges"
2. Configure the System
a. Install (Electronically Pair) Lock(s) – Read
Keypad"
b. Add Users – Read
non-Master users.
c. Change Master User Combination – Read
changing the Combination for the Master User.
3. Customize the System
a. For Keypad Models 702-705, Set Date and Time – Read
for instructions on setting or re-setting the Time.
b. Configure other System Functions – Instructions for configuring custom options are provided in
Section 3.3 "System
3 How to Use the System
This section outlines how to use the installed system and how to execute specified functions. Please note that
your installation may not include everything outlined in this section.
3.1 Keypad Model Definitions
Table 1 – Keypad Model Definitions
Model 701
OLED Display
Keypad
(1.28", Monochrome,
128 x 64)
Compatible
Lock Types
⸸(Swing Bolt, Dead
Bolt, Spring Bolt)
for an overview how each user is authorized to use the system.
for instructions on performing this step.
Section 3.4.3 "Assigning User IDs and Privileges"
Functions".
Model 702,
702D
No 702D only
⸸All ⸸All
Section 2.2 "System Components"
Section 3.3 "System Functions"
Section 3.4.1 "Lock User Types"
Section 3.5 "Install (Electronically Pair) a Lock and
Section 3.7 "Change Combination"
Model 703,
703B
Yes
⸸All
dormakaba USA Inc. System User Guide 7040.1121 Rev E2 10/22 | 11
for an overview of
for instructions on adding all
for instructions in
Section 3.9 "Change Time/Date/DST"
Model 704,
Model 705
704B
Yes Yes
⸸All ⸸All
for
and 3.4.2