Delete User:
#56 _ _ (ID) _ _ _ _ _ _ (Combo) _ _ (User
#56
to Delete)
Reset User
#57 _ _ (ID) _ _ _ _ _ _ (Combo)
Combination:
_ _ (ID to Reset) _ _ _ _ _ _ (New Combo)
#57
_ _ (ID to Reset) _ _ _ _ _ _ (New Combo)
Uninstall/Reinstall/Reset Keypad and Lock
The commands below are shown with the
will respond with a short red flash and low beep signaling that the lock is ignoring that key and waiting for your
# command.
Audit Events shown below are not recorded for the 701 Models.
Action
Command String
Reinstall
#32 _ _ (ID) _ _ _ _ _ _ _ _ (Combo)
Keypad: #32
Uninstall
#23 00 (ID) _ _ _ _ _ _ _ _ (Combo)
Lock: #23
Reset Lock:
#25 00 (ID) _ _ _ _ _ _ _ _ (Combo)
#25
Install Lock:
#22 00 (ID) _ _ _ _ _ _ _ _ (Combo)
#22
as the key press for waking the system. When not needed the lock
Requirement
Open Privilege
Required
Master Only
Master Only
Uninstalled: Master
Combination has
been changed from
default.
dormakaba USA Inc. System User Guide 7040.1121 Rev E2 10/22 | 74
Master or
Keypad:
Manager
Lock: User Deleted
Audit: Event 14 Recorded
Manager must
be deleted by
Master
Master or
Keypad:
Manager
Lock: User will have new
Initial Combination.
Manager must
User must change
be reset by
combination for first
Master
use.
Combination
Audit: Event 14
Length must
Recorded
meet requirement
Result
Keypad: Alternating Red
and Green Flashes
indicate the same Keypad
Model is not paired,
Success indicated with
Lock: Lock is Installed to
Keypad
Audit: Event 17 Recorded
Keypad:
Lock: Is no longer installed to
Keypad, all settings are
maintained
Audit: Event 11 Recorded
Keypad:
Lock: Master Combination
is reset to 12345678, All
users deleted, All Factory
Defaults restored, Lock will
be uninstalled from Keypad
Audit: Event 4 Recorded
Keypad:
Lock: Installed
Audit: Event 5 Recorded