dormakaba LA GARD 700 Serie Guia Del Usuario página 32
Ocultar thumbs
Ver también para LA GARD 700 Serie:
- Guia de instalacion (61 páginas) ,
- Manual del usuario (30 páginas) ,
- Guia del usuario (19 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
3. From the sub-menu, select "Edit".
4. Input the User ID to be edited.
5. From the menu, select one of the following settings to change and perform the associated steps:
•
Status of a User:
a. Select "Status"
b. Select between Enabled and Disabled
•
Reset the Combination:
a. Select "Reset Combo"
b. New Combo appears on screen. Input a new Combination with the number pad
Note: The new Combination must be different from the old Combination. The User is
advised to use a strong combination.
c. Confirm appears on screen. Input the same Combination from the previous step to
•
Change User Privileges:
a. Select "Privileges"
b. Select from Open Priv, Audit Priv, TDO Pin Priv and Timelock Priv. For each, use the
•
Change the User Type:
a. Select "User Type"
b. Select between Standard User and Manager
6. Navigate through the options and select "Update User". "Success" appears on screen. The Keypad will
beep three times and flash a green LED once complete.
3.4.4.2 Edit User – Non-Display Keypad
For keypads without a display, do one of the following:
Enable/Disable User - Temporarily suspends user access to the system. For example, if a user is on
•
vacation. Perform the following actions using the Keypad:
a. Input the pound key (#), then the number 54.
b. Input the Authorized User ID and Combination.
c. Input the User ID of the User you want to edit.
d. To enable the user, input the number 1. To disable the user, input the number 0.
e. Press <return key> (←)
Edit User Lock Privileges – Add or remove user privileges for a given lock. Perform the following actions
•
using the Keypad:
a. Input the pound key (#), then the number 55.
b. Input the Authorized User ID and Combination.
c. Input the User ID of the User whose Lock Privileges you want to edit.
d. Input the number associated with the privilege level you want to assign the user. The options are
as follows:
confirm. Success combo reset appears on screen. The Keypad will beep three times and
flash a green LED once complete
Keypad to select which locks the User will have privilege(s) on, if applicable
1
>
Open Lock Privilege
2
>
Audit Lock Privilege
3
>
Open Lock and Audit Lock Privileges
dormakaba USA Inc. System User Guide 7040.1121 Rev E2 10/22 | 30
Publicidad
