Publicidad
Idiomas disponibles
Idiomas disponibles
change the handle to upward to avoid affecting subsequent use.
2）Use environment
Ambient temperature: 10 ~ 38 ℃ Humidity: ≤ 90% relative humidity
a, A fixed horizontal position to ensure the normal operation of the
machine, without accidents;
b, Good ventilation and cooling conditions, to avoid heat and direct
sunlight. Avoid areas where water splashes may occur, with sides of air in
or out over 50cm from walls or similar obstructions.
3)Power Connectiom
a. Confirm the power type and capacity according to the nameplate
marked voltage and power.
b.Make the machine power cords connect with the power according to the
following requirements, and ensure yellow-green line connect with ground
line. Brown line (L) connects to the hot line, blue line (N) connects to the
zero line, yellow / green line power supply ground.
①For your and others' safety and that of others, make sure
that the machine is well grounded
② All external wiring and electrical appliances should be
combined with national standards.
③ For a machine without a plug, the machine power cord
can only be connected to an external power source that
contains an air switch and the machine power cord is
connected directly to the air switch. If machines rated is less
Notice
than 2000W, air switches with 16A (single-phase) or 10A
(three-phase) should be used.If machines rated is more
than 2000W, air switches with 32A (single-phase) or 16A
(three-phase) should be used.
- 8 -
Publicidad
