VEVOR CKX300PRO-A19-A Manual De Instrucciones página 18

parameters and returns to standby state.
c. Online detection and dispensing number display:
In the cleaning state, press and hold the "defrost" button for 5 seconds, the
display will display the speed. If the speed measurement is successful, the
display will display "END" and the buzzer will beep once and the speed
measurement value will be saved.
Dispensing number display: In standby mode, press and hold the "defrost"
button for 5 seconds to enter the password input state for dispensing
number inquiry (P000 is displayed), the first digit flashes 0, and the minus
and plus keys correspond to minus and plus changes of 0-9. Short press
the "defrost" button to switch to the second digit 0 flashing, and then, when
the three-digit value corresponds to the password 222, it flashes, and the
number of dispensing is displayed: ****. The digital tube of the hardness
percentage of the display screen is in the thousands and hundreds digits,
and the digital tube of the display hardness display window is in the ten
digits. It will exit after 5 seconds of no operation.
Clear the number of seriving: In the state of querying the number of
serving. Press and hold the "defrost" button for 5 seconds, the number of
cups serving will be cleared and the buzzer will beep once. Return to the
standby interface.
◆Clean
Press " ", the beater motor starts, and the corresponding "CLEAR" icon
lights up. Press "
"CLEAR" icon goes out.
◆Overnight Function
Press " ", the "STANDBY" and "FRESH" icons will light up. The
pre-cooling compressor is controlled by the hopper pre-cooling
" again, the beater motor stops, and the corresponding
- 16 -