Publicidad
Idiomas disponibles
Idiomas disponibles
Discharge door leaking
Mix
Leakage
Low voltage protection
The
buzzer
beeps for
a long
Micro switch cannot be
time
"NL" is
The belt is slipping or the
displayed
motor is slowing down.
.
"——" is
The proximity switch is
displayed
.
"ERR" is
The cooling effect is poor
displayed
or no cooling over one
.
Mix leakage from
discharge hole
mix
Drip pipe leakage
Protection shutdown
reset in time
biased or broken.
hour
Install or replace valve piston
Tighten the screws or replace
the dispenser door seal
Install or replace the beater
Shut down for processing and
restart after 5 minutes
Shut down for processing and
restart after 5 minutes
Push the handle to reset the
Adjust the belt tightness or
replace the belt, or troubleshoot
Adjust or replace it.
Check the refrigeration system,
whether the compressor is
working properly and whether
there is fluorine leakage in the
system. Please contact the
nearest maintenance point.
- 27 -
seal
gasket
micro switch
the motor fault.
Publicidad
