VEVOR CKX300PRO-A19-A Manual De Instrucciones página 25

e. After cleaning, apply vaseline on the parts that need lubrication as
shown in the figure, and install each part according to the disassembly
method.
Note: When installing the piston, seals, beater and beater gasket, apply
vaseline at the corresponding locations (when applying vaseline to the
gasket, apply vaseline in the groove of the gasket, not on the four corners
of the beater ), regular use of vaseline can extend the service life of parts.
B.Machine Cleaning
In order to keep the machine beautiful, please keep the appearance of the
machine clean at all times. You can wipe the machine body with a wet
towel to remove stains, but do not rinse it with water to avoid electrical
failure.
C. Condenser Cleaning
After the machine has been working for a period of time, the condenser
will be filled with dust, affecting heat dissipation and poor cooling effect.
Please clean it regularly (usually once every six months). The specific
method is: turn off the power, dismantle the enclosure, and use tools such
as a vacuum cleaner, high-pressure air, or a small brush to remove dust.
- 23 -