VEVOR CKX300PRO-A19-A Manual De Instrucciones página 14

Feed tube III Installation
No.
1
2 Feed tube inner cylinder
3 Expanded tube outercylinder
4
4a
4b
4c
4d
5
6
a. Connect the air inlet joint to the air pump air pipe. You can use vaseline
to smear the air pipe joint to facilitate the installation of the air pipe.
b. Place the sealing ring in the groove of the feed joint. Use a small
amount of vaseline to lubricate it during installation to facilitate installation.
c. Install each component in place according to the orientation shown in
the figure.
d. When using the feed tube, you can adjust the size of the mix flowing into
the refrigeration cylinder by rotating the different hole diameters on the
adjustment ring to adjust the overrun rate of the ice cream.
When loading mix for the first time, the feeding joint must be disconnected
first.
Name
Air inlet joint
Adjustment ring
Adjustment hole 1
Adjustment hole 2
Adjustment hole 3
Adjustment hole 4
Feed joint
Seals
- 12 -