VEVOR CKX300PRO-A19-A Manual De Instrucciones página 24

1.Piston
2.O-ring
3.Handle
4.Pin for Handle
5.Lower Fasten Screw
6.Upper Fasten Screw
7.Star Cap
d. Put the disassembled parts into the prepared food disinfection cleaning
solution and clean them one by one, and check the wear degree of the
beater, gasket, dispenser door seal, support sleeve and piston o-ring. If
necessary, should be replaced;
8.Dispenser Door
9.Support Sleeve
10.Dispenser Door Seal
11.Beater
12.Beater Gasket
13.Middel Piston O-ring
14.Middle Piston
- 22 -