VEVOR CKX300PRO-A19-A Manual De Instrucciones página 5

environment well ventilated and heat dissipated, dry and clean, avoid heat
sources and direct sunlight, and avoid places where water may splash.
There should be a distance of more than 50cm between each inlet and
outlet grille and walls or similar obstacles. distance;
◆When a freezing cylinder appears in the machine, please cut off the
power, wait 30 minutes and then turn on the power again, start the clean
function, lower the hardness level, and then turn on the automatic mode. If
the machine is equipped with a defrost function, you can directly turn on
the defrost function without powering off.
Safety Warning：
◆This machine is operated by professionals or trained personnel.
Children are prohibited from touching, operating the machine, or playing
nearby;
◆The slurry used by the machine, the environment and site used, as well
as the health and wear of the operator must comply with relevant food
safety and hygiene laws and regulations;
◆To ensure personal safety, please ground the machine reliably;
◆When placing electrical appliances, make sure the power cord is not
pinched or damaged;
◆Do not place multiple portable sockets or portable power supplies
behind the machine;
◆Make sure the power supply used is the same as the nameplate on the
machine, and the working voltage must not deviate from the rated voltage
±10%, and the wiring must be performed by professionals;
◆If the power cord is damaged, to avoid danger, please have it replaced
by maintenance personnel from the manufacturer or maintenance
department or similar professionals;
◆When the machine is connected to an external power supply, it must be
- 3 -