VEVOR CKX300PRO-A19-A Manual De Instrucciones página 12

in reverse.
To prevent the mix in the barrel from flowing into the refrigeration cylinder.
to achieve adjusted ice cream overrun rate.
No.
1 Feed Tube Plug
2 Plug Seal
3 Feed Tube O-ring
4
5
When adding mix to the hopper tank, please do not flood
the top of the feed tube with the mix.
Notice
Feed Tube (II) Installation
a. Place the sealing ring in the groove of the feed joint. Use a small
amount of vaseline to lubricate it during installation to facilitate installation.
b. Insert the inner tube of the feed tube into the outer cylinder of the feed
tube in the direction shown in the figure. Pay attention to the alignment of
the air inlet and feed hole of the inner tube and the outer cylinder.
Name
Optional
Feed Tube
Feed Hole
- 10 -