Publicidad
Idiomas disponibles
Idiomas disponibles
Air pump cycle stop time
F2
Hopper temperature
F3
compensation value setting
F4
temperature compensation
Overlow temperature
F5
protection setting
Pre-cooling cycle start time
F6
Pre-cooling cycle stop time
F7
F8
FJ relay working mode
Defrost compressor working
F9
Continue to click the "defrost" button to enter cycle parameter settings. If
no operation within 10 seconds, the system automatically saves
setting
setting
Feezing cylinder
value setting
setting
setting
time
Range 0-90 seconds, default 10
Range -5.0—5.0, default 0
Range -5.0—5.0, default 0
Range 20.0-8.0
Indicates -20℃--8℃, default 12
Range 00-30 seconds, default 15
Range 0.0-8.0 minutes, default 5
0 or 1, 0 is the working mode of
the refrigeration solenoid valve.
In the refrigeration and overnight
preservation modes, it opens and
stops at the same time as the
main press solenoid valve relay.
1 is the bypass solenoid valve
working mode, which is opposite
to the main press solenoid valve
relay opening and stopping.
Range 3-9 minutes, default 6
- 15 -
seconds
seconds
Publicidad
