Alpinestars Tech-Air 3 Canvas Manual De Instrucciones página 22

9. System Installation and Fitting
For the correct use of the System, the user must go through the following steps:
1. Put on the System and fix the Airbag present in the chest area connecting the Chest
Magnetic Button (9) with the Left Magnetic Button(11) present on the vest (Figure 9).
2. Close the Activation Zip (1) from the bottom to the top and wait for the System to switch
on
3. The correct closure of the Activation Zip (1) and the switching on of the System are
signaled by the switching on of the LED Display (2) and by the presence of a vibration in
the same area
4. Once the System is switched on, check the LED Display (2) to verify that the System has
started correctly (see Section 13 "LED Display Indications"). In particular, the user must verify
that, after the System start-up, no System fault is present.
Magnetic buttons
Figure 9
23 EN