Publicidad
Idiomas disponibles
Idiomas disponibles
Tip:
If the System does not switch on (no LED Indications present) check that
the Activation Zip (1) has been correctly closed. In addition, check that the
Tech-Air® battery has a sufficient charge. If the problem persists, contact
Tech-Air® Support (see Section 19 "Tech-Air® Support").
The battery and the status of the Tech-Air® System can be checked by
connecting the System to the Tech-Air® App. When the System Check has
been successfully passed and the System is active, the Tech-Air® App will
display the indication "System On."
System inactivation can be "forced" directly using the Tech-Air® App. This
functionality can be useful in case the user wants to turn off the Airbag
protection, for instance before undertaking some heavy off-road riding
[please note that the System cannot be turned on again by means of the App.
To turn on the System, open and close the Activation Zip (1)].
b) System Check
After the System is correctly turned on, the System will start performing the System Check.
This operation is indicated by a solid yellow LED indicator light. During this phase, the
System checks if it is correctly worn by the user. During the System Check, the System will
not deploy. This phase may take several seconds.
Whilst the System Check is being performed, the System is looking for the user's body
movements to conduct one or all of the following activities:
• Walking (including up and down stairs).
• Mounting the motorcycle.
• Riding the motorcycle.
Note that the following activities are unlikely to pass the System Check:
• Zipping up the jacket without wearing it.
• Standing still.
• Sitting down – INCLUDING sitting on the motorcycle with the engine at idle.
When the System Check is passed, a solid blue LED indicator light will illuminate and the
LED Display (2) will vibrate two times.
27 EN
Publicidad
