iTD uni-cart Instrucciones Para El Uso página 38

Assembly / Electrical safety
2.7.2 Drawers
2.7.3 The isolating transformer
2.8 Additional mounting of system components
3 Electrical safety
3.1 Positioning of the electrical equipment
3.2 Energy column (compact-cart, classic-cart, endo-cart) and
vertical column (uni-cart, vexio-cart, pro-cart)
36
TD_JEST_15_GA_001 Rev.: 001
Drawer unit blocks (pro-cart) are provided with a latch
mechanism.
To release the lock on the pro-cart, the operating handle on
the front cover must be pulled upwards.
The drawers can be lifted out in the extended position.
A label strip can be affixed to the front trim (except pro-cart).
Insert drawer during transport.
The isolating transformer is mounted in a housing under the base of the basic frame. This is
assembled at the factory.
Retrospective installation of ITD system components must only be carried out by specialists in
accordance with the specifications of the installation instructions supplied. The modified overall
system must be rechecked in accordance with the IEC 60601-1.
Make sure that electrical equipment on the uni-cart, vexio-cart,
pro-cart, duo-cart, compact-cart, classic-cart or endo-cart carrier
system does not get wet.
Under no condition should you position the products, which may
lead to loss of their fluidness, over the electrical equipment or
extension lead in which fluidity may be permeate.
The socket strips or the cabling system are located in the left or right
power columns of classic-cart, compact-cart or endo-cart, with uni-cart
and pro-cart it is in the vertical column. The vexio-cart´s socket strips
and cabling system are located beneath the base (cabling can be routed
through optional cable ducts, which are attached laterally to the vertical
column).
Power columns are located on the left and right behind the vertical
extrusion and permit optimum accommodation of the power equipment
cables available. Do not drill holes in the power columns / vertical
columns because power cables may be located inside the columns.
Erstellt am/durch: 07.04.2015/ITD Freigabe am/durch: 07.04.2015/ETI Seite 38 von 128