iTD uni-cart Instrucciones Para El Uso página 43

3.11 Minimum safety
4 Transportation
4.1 Safe transportation on castors
4.2 Safe transportation by carrying
Operating manual uni-cart, vexio-cart, pro-cart, duo-cart, compact-cart, classic-cart and endo-cart 03/2014
TD_JEST_15_GA_001 Rev.: 001
• Non-electrified equipment carts and support systems
• Height adjustments and attachment parts to height adjustments
• Handles, mouse pads, drawers, drawer bodies and attachments (bottle mounting brackets,
baskets, camera mounting brackets, infusion tripods, ...)
• Keyboard extensions and extendable shelves
• Computer holder
• Conductive castors
• Support arms installed and monitor mounting brackets
„Secondary power circuit with insulation monitors" are only excluded from the dielectric strength
inspection!
ITD GmbH is not aware of any item of equipment or accessory that reduces the minimum safety
of the system. Only equipment not presenting a hazard may be used.
If necessary, this should be clarified by means of a risk analysis (ISO 14971).
Please ensure that before the mobile use of the equipment cart:
• All equipment / products in transit are secured against detachment.
• All swivel arms must be swivelled in and secured.
• The feeder from the local outlet must be disconnected.
• The brakes of the castors are released.
The equipment cart should only be moved at a maximum walking pace of 6 km/h. The velocity is
significantly reduced when knocked down by bedplates, cables as well as hoses. It is safer to
deliver by driving on ramps having a max. gradient of 10° so that the equipment cart can be
brought to a standstill at any time.
Although all precautionary measures have been observed to guarantee maximum stability for
this product, it is important to pay attention to unevenness in floors, lift door frames, cables, etc.
in order to prevent accidents.
Fundamentally, the requirements of the IEC 60601-1 apply.
Handles are not provided for lifting the mobile equipment carts, but exclusively have a function for
pushing. Lifting and carrying the mobile device carrier must only be carried out by two persons
using the extensions of the base.
Fundamentally, the requirements of the IEC 60601-1 apply.
Erstellt am/durch: 07.04.2015/ITD
Electrical safety / Transportation
Freigabe am/durch: 07.04.2015/ETI
41
Seite 43 von 128