Troubleshooting; Drive Status; Faults - Gram IF 4000 Manual De Uso

Troubleshooting

Chapter 4 provides information to guide you in troubleshooting the
PowerFlex 40 drive. Included is a listing and description of drive faults
(with possible solutions, when applicable).
For information on...

Drive Status

Faults

Drive Status
The condition or state of your drive is constantly monitored. Any
changes will be indicated through the integral keypad.
LED Indications
See for information on drive status indicators and controls.
page 2-3
Faults
A fault is a condition that stops the drive. There are two fault types.
Type Fault Description
Auto-Reset/Run
Non-Resetable
See page... For information on...
4-1 Fault Descriptions
4-1 Common Symptoms and
Corrective Actions
When this type of fault occurs, and A092
Related Parameter(s): A055, A058, A061, A093
value greater than "0," a user-configurable timer, A093
Rstrt Delay] Related Parameter(s):
timer reaches zero, the drive attempts to automatically reset
the fault. If the condition that caused the fault is no longer
present, the fault will be reset and the drive will be restarted.
This type of fault may require drive or motor repair, or is
caused by wiring or programing errors. The cause of the fault
must be corrected before the fault can be cleared.
Chapter
See page...
4-3
4-5
[Auto Rstrt Tries]
is set to a
[Auto
A092, begins. When the
4