Gram IF 4000 Manual De Uso página 373

A-2 Supplemental Drive Information
Specifications
Drive Ratings
Output Ratings
Catalog
Number
kW (HP)
100 - 120V AC 1-Phase Input, 0 - 230V 3-Phase Output
22B-V2P3N104 0.4 (0.5)
22B-V5P0N104 0.75 (1.0)
22B-V6P0N104 1.1 (1.5)
(1)
200 - 240V AC – 1-Phase
22B-A2P3N104 0.4 (0.5)
22B-A5P0N104 0.75 (1.0)
22B-A8P0N104 1.5 (2.0)
22B-A012N104 2.2 (3.0)
200 - 240V AC – 3-Phase Input, 0 - 230V 3-Phase Output
22B-B2P3N104 0.4 (0.5)
22B-B5P0N104 0.75 (1.0)
22B-B8P0N104 1.5 (2.0)
22B-B012N104 2.2 (3.0)
22B-B017N104 3.7 (5.0)
22B-B024N104 5.5 (7.5)
22B-B033N104 7.5 (10.0)
380 - 480V AC – 3-Phase Input, 0 - 460V 3-Phase Output
22B-D1P4N104 0.4 (0.5)
22B-D2P3N104 0.75 (1.0)
22B-D4P0N104 1.5 (2.0)
22B-D6P0N104 2.2 (3.0)
22B-D010N104 4.0 (5.0)
22B-D012N104 5.5 (7.5)
22B-D017N104 7.5 (10.0)
Input/Output Ratings
Output Frequency: 0-400 Hz (Programmable)
Efficiency: 97.5% (Typical)
Digital Control Inputs (Input Current = 6mA)
SRC (Source) Mode:
18-24V = ON
0-6V = OFF
Control Output
Programmable Output (form C relay)
Resistive Rating: 3.0A at 30V DC, 3.0A at 125V AC, 3.0A at 240V AC
Inductive Rating: 0.5A at 30V DC, 0.5A at 125V AC, 0.5A at 240V AC
Fuses and Circuit Breakers
Recommended Fuse Type: UL Class J, CC, T or Type BS88; 600V (550V) or equivalent.
Recommended Circuit Breakers: HMCP circuit breakers or equivalent.
Protective Features
Motor Protection: I 2 t overload protection - 150% for 60 Secs, 200% for 3 Secs (Provides Class 10 protection)
Overcurrent: 200% hardware limit, 300% instantaneous fault
Over Voltage: 100-120V AC Input – Trip occurs at 405V DC bus voltage (equivalent to 150V AC incoming line)
200-240V AC Input – Trip occurs at 405V DC bus voltage (equivalent to 290V AC incoming line)
380-460V AC Input – Trip occurs at 810V DC bus voltage (equivalent to 575V AC incoming line)
Under Voltage: 100-120V AC Input – Trip occurs at 210V DC bus voltage (equivalent to 75V AC incoming line)
200-240V AC Input – Trip occurs at 210V DC bus voltage (equivalent to 150V AC incoming line)
380-480V AC Input – Trip occurs at 390V DC bus voltage (equivalent to 275V AC incoming line)
Control Ride Through: Minimum ride through is 0.5 Secs - typical value 2 Secs
Faultless Power Ride Through: 100 milliseconds
Dynamic Braking
Internal brake IGBT included with all ratings 0.75 kW (1 HP) and larger. Refer to Appendix B for DB resistor ordering
information.
(1)
200-240V AC - 1-Phase drives are also available with an integral EMC filter. Catalog suffix changes from N104 to N114.
(2)
Refer to the Bulletin 140M Motor Protectors Selection Guide, publication 140M-SG001... to determine the frame and
breaking capacity required for your application.
Input Ratings
Voltage
Amps Range kVA Amps Fuses
2.3 90-126 1.15 9.0
5.0 90-126 2.45 20.3
6.0 90-126 3.0 24.0
Input, 0 - 230V 3-Phase Output
2.3 180-265 1.15 6.0
5.0 180-265 2.45 12.0
8.0 180-265 4.0 18.0
12.0 180-265 5.5 25.0
2.3 180-265 1.15 2.5
5.0 180-265 2.45 5.7
8.0 180-265 4.0 9.5
12.0 180-265 5.5 15.5
17.5 180-265 8.6 21.0
24.0 180-265 11.8 26.1
33.0 180-265 16.3 34.6
1.4 340-528 1.4 1.8
2.3 340-528 2.3 3.2
4.0 340-528 4.0 5.7
6.0 340-528 5.9 7.5
10.5 340-528 10.3 13.0
12.0 340-528 11.8 14.2
17.0 340-528 16.8 18.4
Approvals
Analog Control Inputs
SNK (Sink) Mode:
4-20mA Analog: 250 ohm input impedance
0-6V = ON 0-10V DC Analog: 100k ohm input impedance
External Pot: 1-10k ohms, 2 Watt minimum
18-24V = OFF
Branch Circuit Protection
140M Motor
(2)
Protectors Contactors
15 140M-xxE-C16 100-C12
35 140M-xxE-C20 100-C23
40 140M-xxE-C32 100-C37
10 140M-xxE-B63 100-C09
20 140M-xxE-C16 100-C12
30 140M-xxE-C20 100-C23
40 140M-xxE-C32 100-C37
6 140M-xxE-B40 100-C07
10 140M-xxE-C10 100-C09
15 140M-xxE-C16 100-C12
25 140M-xxE-C16 100-C23
35 140M-xxE-C25 100-C23
40 140M-xxE-C32 100-C37
60 140M-xxE-C45 100-C60
3 140M-xxE-B25 100-C07
6 140M-xxE-B40 100-C07
10 140M-xxE-B63 100-C09
15 140M-xxE-C10 100-C09
20 140M-xxE-C16 100-C23
25 140M-xxE-C20 100-C23
30 140M-xxE-C20 100-C23
D
D
U L U L
UL508C CSA 22.2
C
® ®
EMC Directive 89/336
LV: EN 50178, EN 60204
EMC: EN 61800-3, EN 50081-1, EN 50082-2
Opto Outputs Analog Outputs (10 bit)
30V DC, 50mA 0-10V, 1k ohm Min.
Non-inductive 4-20mA, 525 ohm Max.
Power
Dissipation
IP20 Open
Watts
30
56
70
30
55
80
110
30
55
80
115
165
226
290
30
40
60
90
150
160
200