Fig. 4
Note : The front derailleur cable housing must pass UNDER the bottom bracket
Frame routing with a wireless electronic groupset (SRAM eTap type)
1-
Install the Ø7.5mm plug
2-
Install the removable plug stop
3-
Stick the LOOK
glueing.
J
at the rear chainstay exit.
C
in the housing provided from the front derailleur.
I
sticker onto the cap. Clean and degrease the surface for optimum
Nature de la modification
ECHELLE 1:4
Volume (mm3)
Masse (g)
FORMAT A3
Dessiné par
Date
Vérifié par
Date
All information contained on this drawing is property of LOOK CYCLE INTERNATIONAL. Its reproduction for any use in any
purpose is forbidden. All rights on this material are reserved.
EN
Resp
Matière
ENSEMBLE
796 MONOBLADE
DESIGNATION
Routage mécanique
10