Fitting The Saddle Onto The Seatpost - Look 796 Monoblade RS Manual De Uso

EN
The AEROPOST is an integrated seatpost, patented by LOOK and developed exclusively for the
LOOK 796 MONOBLADE frame. This seatpost removes all risk of slipping because it is fixed
directly on the frame. Once remove it allows a low volume bike to be obtained with the aim of
travelling easily.
The concept includes an elastomer that helps filter road vibrations and gives a certain freedom
to the saddle, increasing comfort on the bike.
The AEROPOST offers a large layback range from its two reversible seatposts supplied in your
kit (small layback and large layback).
It offers compatibility with the Selle Italia Monolink® standard (adaptor parts sold separately).
Fitting a saddle with round or oval double rails onto the AEROPOST seatpost
1- Place the saddle on the AEROPOST head
2- Insert the top support marked with the «Ø7» logo
Ø7mm round rails or the support marked «Ø OVERSIZE»
3- Then insert the bottom support
4- Place the two bottom clamps and tighten the previously greased screw
torque indicated when your saddle is suitably positioned.
Fig. 34
Important : Your AEROPOST is not compatible with oval rail saddles having rails with height
greater than 9.5 mm.
41

Fitting the saddle onto the seatpost

9 under the saddle rails.
if you want to use a seatpost with
8-1
for a saddle with oval rails .
8-2
10 to the 8 Nm