Aerobrake 2 Adjustment; Changing Aerobrake 2 Pads - Look 796 Monoblade RS Manual De Uso

AEROBRAKE 2 adjustment

1
2
3
Fig. 20
1,5 // 2 mm
Fig. 20.1

Changing AEROBRAKE 2 pads

Check that the new pad includes a notch
allowing the pad to be locked into the pad
holder. Never ride without the pin.
Remove the pins using a flat screwdriver,
change the pads, ensuring that they are
correctly oriented, then replace the pins
(Fig. 21).
1. If you use wide rims (> 24 mm) remove the washers between the pad
holders and the inside levers.
2. Pad clearance adjustment (3 mm Allen key, fig. 20.1): clockwise
rotation: the pad moves away from the rim // anti-clockwise rotation: the
pad moves closer to the rim
3. Pad angle position adjustment (4 mm Allen key, fig 20.2)
4. Spring tension adjustment (2 mm Allen key, fig. 20.3): adjust the
tension of the springs to make the lever movements symmetrical
Pad angle of
attach: 0.5
mm
Fig. 20.2
Wheel
rotation
direction
NO
Fig. 21
Fig. 20.3
û ü
OK
EN
28