Look 796 Monoblade RS Manual De Uso página 74

EN
N° Designation
1 External lever hoods (x2)
2 Cable clamp screw and plate
3 Cable guide
4 Outside levers (x2)
5 Pad separation adjustment screw
(x2)
6 Spring prestress adjustment screw
(x2)
7 Inside levers (x2)
ALL THE FOLLOWING OPERATIONS ARE TO BE DONE BY AN APPROVED RETAILER
To fit the brakes you will need the following tools:
• set of Allen keys
• cutting pliers
• cable outer ferrules
• cable ferrules
• torque wrench
ATTENTION :
• The pads fitted as original equipment on the frame kit (if your 796 MONOBLADE is delivered
without wheels) are only compatible with rims with an aluminium braking strip.
• The AEROBRAKE 2 front brake needs the use of a flexible brake cable (3x supplied in the
bag).
25
N° Designation
8 Springs (x2)
9 Lever pivots (x2)
10 Cable pipe holder
11 Cable pipe
12 Guide ring (do not lubricate)
13 Front flexible brake cable