Hydratation And Nutrition; Seat Tube Bottle Holder - Look 796 Monoblade RS Manual De Uso

N° Designation
1 BRIDGE
2
Extension support
3
Spacers (x2)
4
M5x16 CHC screw fixing
5
M5 square nut for screws
6 M5 FHC top fixing screw (x4) – Tighten to 4 Nm with a 3mm Allen key
7 M5 FHC bottom fixing screw (x4) – Tighten to 4 Nm with a 3 mm Allen key
(screw length supplied in the kit: 30 mm. Suitable when
without an intermediate wedge)

Seat tube bottle holder

Your 796 MONOBLADE is equipped with a fixing
for attaching a bottle holder onto the seat tube
(Fig. 30).
Remove the two M5 screws with a 4 mm
Allen key. Fit the bottle holder (refer to the
corresponding product instructions), then
retighten the screw to 3 Nm torque. "Use only
originally supplied screws."
Note : The use of a narrow aerodynamic
profile bottle is recommended, in order
to optimize the performance of your 796
MONOBLADE.
3
onto (x4) – Tighten to 6 Nm with a 4mm Allen key
6
(x4)
HYDRATION AND NUTRITION
3
is directly on the bar
EN
Fig. 30
38