Unclamping; Cyclist's Saddle Height Adjustment; Seatpost Height Adjustment - Look 796 Monoblade RS Manual De Uso

EN
clamp torque between 3 and 4 Nm.
4- Press the elastomer cover into the retaining groove between the frame and the seatpost.
Fig. 36
Note : After the first tightening completely normal cracking sounds can be produced linked
to positionning of the seatpost carbon fibres.

Unclamping

To remove your AEROPOST reverse the previous operations.

Seatpost height adjustment

In case of a saddle, pedals or shoes replacement, you can adjust your saddle height by adding/
removing 1 mm millimetric shims
height does not need a change in fastenings. It is also possible not to use any shims. To adjust
your saddle height:
1- Remove your saddle from the seatpost head (Cf. § Removing the saddle).
2- Withdraw the 2 fixing screws from the seatpost head
and the elastomer part
3- Add or remove the necessary millimetric shims
4- Put the elastomer part
5- Put the 2 conical washers
6- Refit your saddle onto the seatpost head (Cf. § FITTING THE SADDLE ONTO THE SEATPOST)
43

Cyclist's saddle height adjustment

(shims supplied in the spare ). The maximum 12 mm shim
2
3 .
3 (note the orientation) and the seatpost head back in place.
6
and 2 screws
7 , then withdraw the seatpost head,
2 to obtain the desired saddle height.
7
, back in place, and tighten them to 4 Nm.