Vehicle Make And Model Selection Window - SICE A 948 Manual De Instrucciones

The data input windows refer to:
- Markes of vehicle in databank;
- Models of vehicle in databank;
- Customers on file;
- Vehicles on file;
- Operators on file.
To enter the data, proceed as follows:
- select the field to be entered using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- type a character/value
To confirm the data entered and exit this window, proceed as follows:
- press the F3 key; you will be prompted to confirm saving of the data.
- press F3 to confirm,
If you do not wish to confirm saving, press F2.
When entering a new item, the system prompts the user with data for a similar vehicle to
simplify the entry of the tolerance data.
Notes
The data for a new customer and/or a new vehicle can also be entered at the end of the
measurement and adjustment procedure of a model chosen from the vehicle databank.
In the printing window, a message prompting the input of data will appear when saving of data
on request or in automatic mode has been set in the setup.
In the printing window, the data input window is accessed by pressing the F9 key.

VEHICLE MAKE AND MODEL SELECTION WINDOW

If display of the vehicle make and model selection window has been set as part of the operating
sequence in the machine setup, this window appears automatically. It allows the user to select the
make of the vehicle using the procedures described in the paragraph "General Considerations".
The following keys are active in this window:
- F1 displays the on-line "Help" function
- F2 returns to the previous screen
- F3 (or "Enter"): confirms selection of a make and advances to model selection window
- F4 chooses whether to display:
Makes/models file

• all the available makes;
• only makes from the primary databank;
• only user-defined makes in the secondary (personalised) databank.
Markets

• Argentina
• Brazil
• China
• Europe
• Japan
• Korea
• Asia
• North Africa
• North America
• Oceania
• South Africa
30