Front Axle Measurement And Adjustment Window - SICE A 948 Manual De Instrucciones

 Alignment procedure
Adjustment with car raised

• On;
• Off;
- F5 enables/disables execution of the "Jack & Hold" procedure
- F6 switches between display of the camber, Track Difference and Setback adjustment boxes
(set back).
- F7 displays the animation window
- F8 displays a window with a list of working windows. Used for skipping quickly between
windows.
- F10 returns to the starting window.
Notes
• The numeric values are colour-coded as follows:
- Red background: value outside the permitted tolerance range;
- Green Background: value within the permitted tolerance range;
- Blue background: value with no associated reference tolerance range;
• Animated icons that respond to the progress in the adjustment procedure appear beside the
adjustment value display fields.
• The icons assume the following forms:
- Large icon with pointer.
Provides an approximate indication of the status of the angle and the wheel position (shown
on an arc with different coloured zones: red zones mean value outside tolerance range,
central green zone mean acceptable value);
The large icon with pointer ceases to be animated and the coloured arc disappears when
there are no tolerance values for the vehicle selected.
- Small icon with coloured scale.
Provides a high-precision reading, appropriate to the tolerance value, of the variations in the
adjustment value in relation to the tolerance value. Displayed instead of the large icon with
pointer when this icon gives a reading in the green zone. The reading is provided on a
graduated bar. When the wheel value is near the limits of the tolerance range, the bar
background is white. It switches to green when the wheel adjustment value is at +/- 4
grades from the nominal setting value.
• The status of the sensor levelling devices mounted on the axle considered appears in the
bottom of the screen, above the F5 and F6 keys.

FRONT AXLE MEASUREMENT AND ADJUSTMENT WINDOW

Displays the measured values for the front vehicle axle and the reference adjustment tolerances.
The values are continually updated to guide the operator performing the adjustment.
The following keys are active in this screen:
- F1 invokes on-line "Help"
- F2 returns to the previous window
- F3 (or Enter): advances to the next window
- F4 sets:
 Unit of measurement
Toe angle

Degrees;
Length
39