Information Regarding Ul; Field Wiring Power Terminals; Short Circuit Current Rating - SEW MOVIDRIVE modular Instrucciones De Funcionamiento

Instalación
4

Information regarding UL

4.15 Information regarding UL
4.15.1

Field Wiring Power Terminals

MDP90A-...-
0100 (size 1)
0100 (size 1A)
0250
MDA90A-...-
0020 – 0120
0160 – 0240
0320 – 0480
MDD90A-...-
0020 – 0040
0020 – 0080
4.15.2

Short Circuit Current Rating

168
Instrucciones de funcionamiento – MOVIDRIVE
NOTA
El siguiente capítulo se imprime siempre en idioma inglés, independientemente del
idioma de esta documentación, debido a los requerimientos UL.
• Use 60/75 °C solid or stranded copper wire only sized at 14 AWG minimum. Suita-
ble for 1 wire per terminal.
• For double axis modules use wire size 12 – 14 AWG.
• Tighten terminals to in-lbs (Nm) as follows
Line connection
X1 4.4254 – 5.3105 (0.5 – 0.6)
X1 4.4254 – 5.3105 (0.5 – 0.6)
X1 23.552 – 35.403 (3.0 – 4.0)
Motor connection
X2 4.4254 – 5.3105 (0.5 – 0.6)
X2 13.276 – 15.046 (1.5 – 1.7)
X2 23.552 – 35.403 (3.0 – 4.0
Motor connection
X2 4.4254 – 5.3105 (0.5 – 0.6)
X2 13.276 – 15.046 (1.5 – 1.7)
DC link connection
X4 23.552 – 35.403 (3.0 – 4.0
Suitable for use on a circuit capable of delivering not more than
• 5000 rms symmetrical amperes when protected by fuses and circuit breakers as
described in the tables below.
Max. voltage is limited to 500 V.
®
modular
Tightening torque in-lbs (Nm)
Power supply module
Braking resistor terminals
X3
X3
X3
Single-axis module
-
-
-
Double-axis module
-
-
All modules
4.4254 – 5.3105 (0.5 – 0.6)
4.4254 – 5.3105 (0.5 – 0.6)
23.552 – 35.403 (3.0 – 4.0)
-
-
-
-
-
-
-
PE connection
23.552 – 35.403 (3.0 – 4.0