Introduction; How To Consult The Manual; Scope Of The Manual; Warranty Conditions - brevini ED2090MR20FL350B3 Manual De Instalación Y Mantenimiento

1. INTRODUCTION:

BREVINI POWER TRANSMISSION S.p.A. would like thank you
for choosing one of its products and is pleased to include you
among its preferred Customers.
The company hopes you will be satisfied when using the gear
unit.

1.1 How to consult the Manual

It is easy to consult this manual by referring to the table of
contents which can be used to find the subject of interest very
quickly. The chapters are organized into a hierarchical structure
that makes it easier to find the required information.

1.2 Scope of the Manual

This manual provides the Gear unit user with all the information
necessary to ensure correct installation, use and maintenance
in compliance with the safety restrictions set forth by current
standards.
To understand this manual even better, we would like to describe
the following terms used in the document:
HAZARDOUS AREA: area within or in proximity to the machine
in which the presence of an exposed person represents a risk to
the safety and health of that person.
EXPOSED PERSON: any person who is inside all or part of a
hazardous area.
OPERATOR: person assigned to install, operate, adjust, perform
routine maintenance and clean the machine.
SKILLED TECHNICIAN: a specialized person who performs
unscheduled maintenance or pairs requiring special knowledge
of the machine, its operation, safety devices and relative
operating methods.
ATTENTION: Operator accident-prevention standards
WARNING: The machine and/or its parts may be damaged
PRECAUTION: Additional information regarding the
operation being carried out
NOTE: Provides useful information
For any doubts or if the manual has been damaged or lost,
please do not hesitate to contact the BREVINI POWER
TRANSMISSION S.p.A. Technical Service Department.

1.3 Warranty Conditions

BREVINI POWER TRANSMISSION S.p.A. warrants that its
products shall be free from defects for a period of 12 months
from the date the product is shown to have been placed
in operation by original user and/or in any case for a period of
maximum 18 months from the date of shipment.
The warranty shall not be valid if the defect or not conformity will
prove to be depending on not correct on not suitable applications
of the product, or if the product has been uncorrectly placed in
operation.
The warranty by BREVINI POWER TRANSMISSION S.p.A. is
expressly limited to the repair or replacement of the defected
product, which is returned our factory after notification of failure,
and thereafter if the product is found by BREVINI RIDUTTORI
S.p.A. to be, in fact, defective.
BREVINI POWER TRANSMISSION S.p.A. shall not be liable
for any damages, either material or economic, resulting from
or caused by any defects. BREVINI POWER TRANSMISSION
S.p.A. will only be liable for repair or replacement of the product.
The gearbox is intended to be used in suitable environment
and for suitable applications in appliance with what has been
foreseen at the moment the project has been studied.
24
Improper use of the gearbox is forbidden.
Any change or replacement of machine parts, which has not
been authorized by BREVINI POWER TRANSMISSION S.p.A.
, may represent an accident risk and therefore releases the
manufacturer from any civil or penal liabilities, and makes the
warranty unvalid.

1.4 General warnings

Personnel must be informed about the following subjects
regarding machine operating safety:
- Accident risks.
- D.P.I. devices designed to ensure operator safety (individual
protection devices: goggles, gloves, hard-hat, etc.).
- General accident-prevention rules or those set forth by
international directives and by the laws of the country where the
machine will be used.
When delivered, check that the Gear unit has not been damaged
during transport and that any accessories are complete.
- Before standing to work, the operator must be familiar with
machine features and must have read this entire manual.

1.5 Reproduction and copyright restrictions

BREVINI POWER TRANSMISSION S.p.A.reserves all rights.
It is prohibited to reproduce all or a portion of the structure and
contents of this manual, unless expressly authorized by BREVINI
POWER TRANSMISSION S.p.A.. Furthermore, it is prohibited
to store such information on any type of support (magnetic,
magnetic-optical, microfilm, photocopies, etc.).

1.6 Revisions

Subsequent revisions of the manual will be issued as a result of
machine functional changes or replacements.

2. TECHNICAL DATA:

Each gear unit is supplied with an identification nameplate and a
manufacture's declaration (as per the enclosure II B) which have
been prepared according to EEC directive 392 and subsequent
amendments. The identification nameplate contains the main
technical data regarding the functional and construction features
of the gear unit. Therefore, it must always be visible and
undamaged.
1) Reduction ratio
2) Serial number
3) Type or gear unit
4) Gear unit output
5) Gear unit input
6) Info
3
2
1
4
6
5