Receiving; Handling The Machine Without Packing - brevini ED2090MR20FL350B3 Manual De Instalación Y Mantenimiento

If the packages are unloaded with a hoist and, in any case, with
a hook, make sure that the load is balanced and for slinging
use lifting accessories that are legally certified. For packages
shipped on pallets, make sure that the lifting accessories do not
damage the machine.
While lifting and positioning the package, avoid any violent
impacts or bumps.

4.3 Receiving

When the Machine is receiving, make sure the supply
corresponds to what is specified in the order. Also check that
the package and its contents have not been damaged during
transport.
The strap holding the product to the packing is sharp. It
may hit the operator while the product is being unloaded.
The packing must be eliminated as follows:
- use a pair of shears to cut the straps (warning: the ends may
hit the operator)
- cut or remove the external packing
- cut the internal strap (warning: the ends may hit the operator)
- remove the machine from the pallets.
If the machine has been damaged or if there are any
defects or missing parts, immediately notify the BREVINI
POWER TRANSMISSION S.p.A. Service department: Tel.
++3905229281, Fax ++390522928300.

4.4 Handling the machine without packing

Before removing the machine from its packing make sure
it is solidly attached to the lifting accessories so that it cannot
slide or flip over. Before handling the machine, remove the wood
blocks inserted in the packing to keep it stable during shipment.
Lift the machine making sure the load remains balanced during
the various operations.
29